Paper Wrapping Cable Machine with 4 heads wrapping 16 layers

1) nice in appearance 2)reasonable in structure 3)dependable in performance 4)stabile in pitch & fast and smooth in running

Feedstock

Section:	10~80mm2
Width/Thickness ratio:	0.4~12

Wrapping paper

Width:	10~32mm
Thickness:	0.040~0.125mm
density	800kg/M3

bobbin size

Take up Bobbin& pay off bobbin size shall follow the drawing provided by the buyer

paper wrapping

   Wrap direction: Film taping head rotation direction can be adjust turn positive or negative

   Wrap tape: range of paper wrapping opposite joint distance: <0.4 mm

   Overlap:0~50%

pay off:1 set

Type:A shaft type pay-off, lifting and lowering by Electric lift wooden dish,pay off wire with belt damping;

Straightening device:1set

Straightening units:5 pcs horizontal, 5 pcs vertical

Diameter of straightening units:Φ46mm

Distance between center:70mm

 

self-hard device: 1set

type: hard roller

each flat surface with rollers: 9 rollers

roller dia: 47mm

roller center distance: 67mm

stretch way: screw manual adjustment, with reading ruling

Test strength after harden finish: ( base on <=60mm 2 area): 200 N/mm

Tapping head:4sets

Diameter of paper plate:External diameter at 330mm, internal diameter at 75mm

Quantity of paper plate on each tapping head:3 pcs

Locking mode of paper plate:Locknut

Position of paper plate:3 pcs on one plane

guiding roller of each wrapping head entrance & exit : including(slide tube add150 mm)

Adjusting looseness of paper wrapping:Adjustable spring

Adjusting angle of paper wrapping:Guiding roller

Wrap tape: range of paper wrapping opposite joint distance: <0.4 mm ,Overlap:0~50%

auto-paper wrapping opposite joint: yes

Wrap angel range: 15~70 angle

Adjusting angle of paper wrapping:Rotating roller

Breaking detector theory:Automatic stop with optic electric inductive

Position of mechanical breaking detector:Behind the paper breaking stopping guidance roller

Quantity of mechanical breaking detector of each tapping lead:Each paper roll has one breaking detector, the breaking detector can play same role of paper finishing detector

Materials of rollers in contact with wrapping paper:C45 steel or stainless steel or plastic, every rollers are polished slick without any coarse, burr or hollow defects.

Linkage pole: movement smoothly

Steel part:With antisepsis treat

Power transmission:By step less transmission, gear box and long axis

Control of rotating direction:By magnetic clutch.

Max rotating speed:800RPM

Actual max working speed:600RPM

rated speed for wrap head moving balance: guarantee

Wrapping head speed display: digital display

pulling caterpillar:1set  

Width of belt:400mm

Contact length:400mm

Belt material:Rubber

Hardness of belt:715kg/cm

Shape of belt:Dent form

Max pulling force:800kgf

Max opening distance between belts:40mm

Power of caterpillar:Provided by main engineer

Synchronization:Mechanically connected

Adjusting method:Mechanic screw

   

meter measuring device:1set

 Type:Electrical display

 Length measuring:By the wheel that directly contacts wire

Length measuring:automatically Stopping the machine at setting length

take up:1set

type: lowering and lifting by motor

Installing bobbin:With pintel of bearing

Lifting and lowering bobbin:Electric lift

Horizontal moving drive: through :torque motor

Motor voltage:0.75KW

drive mode: torque motor control tension

Wire Traversing : by polish rod automatic device

Sides way direction adjust: limit switch

main power 1 set

power voltage: 5.5kw

PIV transmission: support

 Electric control: 1set

sensor: zhengtai or Omron

torque motor: shanghai haozheng

frequency motor: shanghai huabin

Transducer : Shenzhen weichuang( japan technology)  

PLC: Amson

Paper Wrapping Cable Machine with 4 heads wrapping 16 layers